康明斯Cummins Inpower PRO 11.5

发电机组诊断软件版本9.5特点：

InPower为监控设备提供以下功能：

•从个人计算机到PowerCommand发电机组控制、传输控制和系统控制的直接连接能力；有关支持设备的详细信息，请参阅“技术详细信息”选项卡。

•通过电源或调制解调器连接到多个控制装置。

•允许受监控设备向连接的计算机发送警报信息。

•可配置测量单位和用户访问级别（只读、读取/更改值、管理员）。

•调整所连接控制系统内几乎所有的调整参数，包括电压和频率水平、增益、保护设定值和其他值等参数。

•控制器中可配置输入的方便编程。

•查看设备历史、故障代码和与故障代码相关的数据。

•生成监控数据报告

•允许对发电机组控制电源命令进行已发布的固件升级。

•以条形图格式绘制关键参数，并将数据导出到第三方软件工具进行操作和查看。

•根据NFPA 110要求模拟发电机组控制装置中的故障情况，以演示设施中控制器和监控设备的功能。

地区：所有地区

语言：英语

操作系统：WinXP

CD数量：1 CD

更新日期：2017年

GenSet diagnostic software Version 9.5 features:
InPower provides the following functions for monitored equipment:
•Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; For details on devices supported refer Technical Details tab.
•Connection to generator set or transfer switch controls via modem or to multiple controls via PowerCommand (LonWorks) network.
•Allows the monitored equipment to send alarm information to a connected computer.
•Configurable for units of measurement, and level of user access (read only, read/change values, administrator).
•Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
•Convenient programming of configurable inputs in the controllers.
•Viewing of equipment history, fault codes, and data associated with fault codes.
•Generates reports of monitored data
•Allows released firmware upgrades on Power Command genset controls.
•Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
•Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.

Region: All regions
Languages:English

OS:WinXP

Quantity of CD: 1 CD

Date of update: 2017

[wshop_downloads]